email list from Boston Lilly (www.BostonLilly.com)
Cities In Disaster

Mike approached him to offer his assistance and the young man spoke in a very clear and educated American accent "I am looking for your foreclosures department".
Mike explained that there was no such department at the branch, or even at the organisations head office. Indeed Mike knows of no bank that has either a section or department of this type.
The young man was taken aback and a conversation ensued.
This man had only just gotten off a plain from Chicago and his parents asked him to go to the main office of Irelands largest bank to see if there were are bargains to be had - as they had long aspired to have a holiday home in the land of their forefathers, an "in thing" to do - Michael Jackson had just bought an island off our shores, which can been seen for Sarah Jessica Parkers house on the shore.
In Ireland and in the UK we have robust financial institutions. There has been more than one Government bail out in the UK and the possibility of yet another in Ireland - but these institutions were aggressive and their issues do not arise from domestic mortgage issues but from loans given out to stagnant developments (that looked good at the time).
The issue I point to is the difference between compliance and regulation. As a high level view point, In Europe we have regulation (do what you are told) and in the USA it is compliance (do what you said you would do and what you signed up to do).
I see that there will be huge opportunities for our market space (BPA, BPM, et al) as regulation comes to town in a much larger and more onerous way over the next three years.
And the Governments across the globe are talking of the need for this to be US Congress led. As such, I concur that legislation is imminent, that it will be aggressive, and that it will not have they latent implementation period that SOX had.
I there for believe that the flood gates will open and our SAM will grow exponentially. However it will be the leading few that benefit and the rest will follow on their shirt tails.
Now is the time to make sure that the relationships with the larger SI's are in place, that good research is done, that the board of directors is supported by good industry non-execs, and that more than any other subject, RISK COMMAND AND CONTROL has to be understood and emblazoned as a key feature of the product set (smoke and mirrors will do for most of today’s quadrant vendors). There is a short video here on how to capture risk in a process.
It shall be great - but then again, I might be wrong.........
Documentation For The Business
Take a look
http://blogs.gartner.com/jim_sinur/
Here is a Patient Discharge example process we did
http://www.demoprocessmaster.com/HTML/Output/Hospital%20Patient%20Discharge/Hospital%20Patient%20Discharge.html
SOME PROCESS EXAMPLES: I put these process documents up to help Business Users understand basic principles of AS IS and TO BE. You can click in each document so more complex ones are used in education
A VSM of a Orthopaedic Care Pathway http://tiny.cc/Orthopaedic
Parallel Process http://tiny.cc/ParallelProcess
Multi Level Process http://tiny.cc/MultiLevelProcess
Employee New Hire Process http://tiny.cc/NewHireProcess
Sales Process http://tiny.cc/SalesProcess
Simple Process http://tiny.cc/SimplProcess
How to do AS IS discovery video http://tiny.cc/BPMN
If anyone wants any more, then link to me or drop me a line as alan.crean at processmaster.com
We are on the right road
http://www.networkworld.com/news/2009/040609-10-tech-skills.html
Just a note on the top 10 programs of interest to CIO's - and our stuff is number 1.
Where Are All The Old People Coming From
Lean Six Sigma Culture Survey
Reaching out to Aneesh Chopra & Jeff Zients
There are three issues with putting in Best Practice Libraries across multiple organisations
How can it be self funding
How can it be quickly assembled
How can the vast multitude of versions (Masters & Variants) be managed without it being complex
For these issues, a solution is one that would have to..........
Automatically import and catalogue any process models that already exist across the estate (no matter what technology they are in)
Enable a full Business Architecture for all of these models.
Facilitate automation in any technology that already exists in the base.
Scenario..........
You can import a process from Ohio that was built in IBM Websphere, Texas can review it in Computer Associates, Florida can test it in BEA Aqualogics, Alaska can deploy it in Metastorm at the same time that Atlanta deploy it in Oracle, Montana can publish the reference documentation, California can create the dedicated intranet site, Oregon can export it into the LMS for eLearning and (soon) Colorado can simulate it in 2nd life – all the same model, no rebuilding or coding required, just point and click does everything in this paragraph.
We have the “change nothing” “use everything I already have” technology for you
Some of the largest brands in the world are using our technology, along with the UK Ministry of Defence and the UK National Health Service – even though we only brought our Enterprise Business Architecture Technology to market last October.
I would really appreciate a chance to chat to someone in your administration - with us, you could have your Best Practice Library published before the kids go back to school after the summer break.
Yours sincerely
Alan Crean
CEO
Process Master
M: +353 857 654455
E: alan.crean at processmaster.com
Business Process Outsourcing & Business Architecture
We have moved on. We now apply intelligence to capture the business purpose and then design the business to deliver the desired business outcomes. This is where Business Architecture comes in. There is a need for large corporations, who have an outsourcing strategy, to apply a Business Architecture System (like Process Master) to their operation. Business Architecture supports better service design, org charts, process & role descriptions, and governance needs (and an awful lot more) – allowing the corporation to outsource a set of business models with a defined scope and base line – as opposed to a function that will invariable suffer from quality subsidence unless it is supported properly (time drain) and invested in continually (cash drain).
Business Process Architecture
The real thing to focus on is “why” they are made, and my answer is that they act as signposts for what comes next. Because it’s what comes next is the real reason we work and play. For we have all been drilled with the questions from an early age “what are you doing” what are you up to” “where are you going” – and then when we reach the age of responsibility we get asked “what’s next” “how are you going to achieve that” – it all comes down to direction.
Everything we have been to school to learn was about equipping us to decide what direction we should take and what decisions we should make. We do not always have to do these independently, the most important ones we follow are the ones we do as part of a group. Our choices are critical, our ability to follow a path is critical, and for all of this, we do need a map to help lead us on that path. In business terms, the creation of a process map is called business process modelling.
So follow the business process model to perform your task in the way the company considers to be the most efficient and productive way of doing something. However, the real need for the map is not for the population that would follow instinctively, it’s for the hyperactive few that often have trouble staying on task – they twitter all over the place, and I don’t mean that in mini blogging terms. High level maps with scant detail do not work here as it allows them to jump from strategy to tactic and back again until they hit on what works for them, which may not necessarily work for the business. The ultimate truth is, twitterers will never settle into a groove unless it is clearly laid out to them, they are erratic, because being erratic is fun.
It also works at the opposite end of the spectrum, where unmotivated staff are involved. A poor process map allows them to sink back into a comfort zone of doing little or even nothing. Such staff need clear direction or they will not only make themselves useless, but they may take other “off task”, bringing havoc to the entire process chain.
A well modelled business process will produce a good process map. And a good process map gives proper direction, is considerate of all process resources, is authentic to real life, and crystallises the capacity of your staff to fulfil the process in an enjoyable, patient and passionate way – in other words, it is a process map that everyone can be confident in.
I cannot state clearly enough that good business process modelling is an absolute necessity for any CEO who wants to achieve overwhelming performance from his vision – because the vision is his, and it is the organisations process maps that encompass the “how” of how to achieve it.
But “how” is only good enough for what we need to do today – it is the most important position, but not the only one, for there is always a better future.
“How” is the fully documented best current way of doing a job. “How” is our standard operating procedure, our modus operandi, our reason d’ĂȘtre – it defines us.
But we can always improve “how” with a little bit of “why”.
Turning Good into Better is a function of business process modelling. What we are looking to model is the process in such a way as to improve on the way we already do it. For if I can clean up the way I do something, I can probably extract more productivity. In human terms, a clean desk is known to be a more productive place to work than a messy one – and it’s more fun to work at.
Improve = more = more fun = more joy = Better
If I get to the station five minutes before the train arrives in the morning, then I have to stand all the way to work. If I get there ten minutes early, then I get a seat and can work, so a five minute cost can give me back 35 minutes productivity gain – a clear demonstration of how business process modelling leads to process reengineering, giving new standard operating procedures, delivering greater business benefits.
If the business process is not modelled fully, then you may end up with a group of employees having to bring their own intuition to work, which may lead to stressed workers and stressed managers – and if it is a worldwide business, a simple fact of not having the best paperwork possible can allow occurrences (sick days, employee turnover) that hurt the business. After all, a high-paying job within a poorly organized process area that delivers a screaming boss, no job security and a home life fraught with tension isn't a stable place for most people. Not because the money for the job isn't there, but because basic "hygiene" needs aren't being met.
And meeting those “hygiene” issues in each process improvement project requires a reasonable level of decision making competency. You need to be able to make decisions about decisions.
I recently read a process done by a graduate on how to make the perfect cup of tea – he had decided to fill the kettle, pick Darjeeling tea, use sugar and milk, drink it from a mug and remembered to include the wait time to allow the kettle to boil. However, he missed some basic point of what to do if any component was missing, and his start point assumed he was even in the kitchen. It may seem trivial, but many of us govern or perform processes that are familiar to us, but would be alien to someone coming in cold to the process area.
I recently looked at an internal process that pertains to how we launch a new version of our product (version 3.0 is soon to be released). One of the activities is “get new version logo”. There’s a logo? there’s a design of a logo? There’s a designer? The process documentation did not say where, or what spec it should be, and as our last graphic designer has retired and is yet to be replaced, it was a shortfall in our own documentation. Which is bad enough at this stage, but considering the growth rate, Heaven only knows what bottle neck would surface when we get to V4.0 and have ten times the staff we have today, in treble the number of countries.
And this little activity of “get new version logo” seems basic – but when you are doing a launch of the most profound change to the market, which all the analysts are aware of, and all of the competitors will be watching – you can be very sure that any slip up or delay could have catastrophic consequences.
And yes, you guessed it, this new V3.0 of Process Master is the nirvana of business process modelling – because it breaks the rules of where the responsibility of modelling sits – in the business.
We came up with the idea three years ago and the Analyst told us that no one would use it.
We said we would launch in 2007, but we did not make the market until October 2008, and the Analyst said we had no clue how to launch a product
Our initial design was very basic, and the analyst said “see, I told you”
Process Master is pretty cool, non techies like it
We stopped selling after getting our first three clients – to focus on embedding our software into their operations successfully – and the Analyst said we could not scale well
Process Master is outselling any other product in the market, more that even our ambitious business plan predicted
Process Master is going to end up with 60% market share from a standing start
Process Master is now part of the business strategy for a number of the world’s biggest companies…………….See!!
So why is Process Master being successful, and why has business process capture software emerged from the corporate underbelly? (HINT, click on the link)
Every person I meet has a stand point when it comes to what I’m selling. It might be, "I don't care about that," or it might be, "all big companies are evil" or it might be, "I love new stuff." When that persons stand point is aligned with my message, we have something to build on. If their stand point doesn’t reflect mine, I get ignored. The truth is, I get ignored 80% of the time because it is essentially impossible to tell a story to an entire population and have everyone to take notice.
For instance, we are all effected by climate change but the global warming story, for example, has influenced some people a great deal and been dismissed out of hand by others.
Process Master is good because it is pertinent, it is now, and it is about getting better. When I meet people I do not talk about myself, that’s politics. I also do not spend my time talking negatively about my competition, that’s political. What I do talk about is being listened to. Because if I can get your company to listen to you, follow your lead and hang on your every word, you may be strong enough to want that to happen, and if that is the case, then we are aligned.
Process Master is a visionary and innovator.
Watch the Process Master Video
Our ProcessPad vision recognizes a need for business and IT professionals to come together in new ways to succeed in BPM. Its vision reflects the wide range of process maturity seen in the market, extending from enabling basic workflow through dynamic processes. ProcessPad has aggressively gained market share around the world by delivering deep integration; exploiting the growing popularity of BPMN, and using video as its prime marketing channel.
LeanPad’s visionary status comes from its focus on enriching customer experiences and enhancing collaboration in unstructured value streams, care pathways, and supply chains. For Lean processes that benefit from high-fidelity graphics and content presentation and manipulation, LeanPad is superior to any other BPA tool.
Process Master have executed their tier one channel drive well in 2008 and expanded their market presence, while continuing to innovate. Process Master has the best approach for change management processes among all the BPA providers.
Process Master has introduced a number of innovative new features, which are transforming traditional programming-intensive tasks into model-driven aspects for process composition. For example, Process Master has extended business architecture, and governance for regulatory and compliance functions as part of process modeling that dramatically reduces IT efforts.
Process Master is also new to the BPA market. Well-known thought leader Steve Brown (founder of Sysgenics who were the first BPM vendor) who seeks to differentiate Process Master by the concept of Business Architecture.
Multi Layered Process Modeling
Im am not speaking here about the BPMN model element sub-process. This is a defined modeling method within one model. I am speaking of two or more set of models, that cover two or more levels of details of a process. This is important, because the sub-process construct has only limited ability to cover certain dependencies on the detailed level.
It not possible to define a sequence flow between activities, which are inside different sub-processes, whereas in having two set of models for different layers, it would be allowed to model more dependencies on the lower level set of models.If it is required to define a more formal relationship between models of different levels, then more needs to be done.
It is necessary to identifiy or relate activities with each other on the different levels and to define how constraints defined on the higher modeling levels apply to the lower modeling level. If there is such a definition, it may be possible to check compliance of models of different levels.
It is some what cured in the output in this product VIDEO
Visio for Process Documentation
Building a process management capability involves identifying implementing a structure which is usually a methodology and a technology combined. You then need to support that by training individuals who can expertly analyse and document current state processes, who can design future state processes and who can appropriately work a tool to store all this information in.
The system must be there to identify owners at a process level, implement a governance process and put in place appropriate metrics to measure the processes.
A video of all this is located HERE
Project failure - warning signs are intangibles
1. Lack of Interest
2. Poor Communication
3. Lack of Velocity
4. A "No-Bad-News" Environment
5. Concrete Signs and last minute syndrome."
6. Too much caffeine, too many late nights and too much junk food.
7. Diversion of Resources
8. Ratios Trouble - the cost ratio and schedule ratio
9. Milestones Aren’t Met
10. Scope Changes (also known as the "Microsoft Mambo")
11. And Finally... Keep in mind that these signs are exactly that: signs.
This product in this Video will help you
Building a Requirements Management Office as part of Project Office
Video of Requirements Capture Here
The successes of IT development projects continue to indicate that the largest factor for project failure is poor requirements. There can be several reasons for this:
- Requirements practices are too loosely defined or inconsistently applied
- There isn’t adequate support from client and/or IT stakeholders for effort of defining requirements before designing or developing the product
- Project plans are developed without sufficient consideration to stakeholder requirements
- Organizations lack expertly trained business analysis and requirements management staff; and so on.
The damage caused by inadequate requirements definition and business systems analysis results in costs overruns, missed milestones, low employee morale, poor software delivery and compromised customer satisfaction.
IT helps Business Managers complete their IT projects effectively on time and within budget by implementing an organizational infrastructure focused on the business’ requirements through best practices, deliverable models, delivery tools, checklists, and templates designed to complement and support leading industry standards bodies and methodologies such as RUP®, CMMI® , IEEE, Six Sigma and IIBA.
If you are treating your Business Analysis and Requirements Management seriously, consider using industry experts (external consultants if needed) to help guide you along the path to success. This will help you in all the critical areas of implementing an RMO, from the requirements methodology, to requirements administration and management, roles and responsibilities, Project Manager relationship management, Client relationship management, Business Analysts and Requirements Managers, outsourcing, training and professional development, organization change management, tools and technology
Process Requirements Documentation, Review, Analysis and Validation
Included in Requirements Definition is the need to document the requirements, conduct detailed business analysis, perform peer and client reviews and verification, and facilitat the prioritization and acceptance of the requirements.
Use industry best practices to deliver accurate, complete and clear Requirements Specifications. These services are conducted at the end of each use case.
The tasks undertaken as part of these services include Capturing the stakeholders needs and requirements during the Discovery Session and................
- Writing the Use Cases or process narratives
- Preparing the various diagrams and models
- Writing well formed requirements statements
- Documenting the data requirements
- Describing the relevant non-functional requirements
- Facilitating informal or formal peer and client reviews
You also need to adhere to the basics of ensuring the models, requirements and rules are:
Correct
Unambiguous
Complete
Consistent
Ranked
Verifiable
Modifiable
Traceable
Recording the requirements and models in the client’s Requirements Management Tool and facilitating the validation, prioritization and acceptance of the requirements.